photo 1 - 713 terminal with build-in Xerox 820 board

photo 2 - Taking the (old) floor apart

photo 3 - The 960 and 4680 parked

photo 4 - Start of the Cyber island build

photo 5 - The new power distribution boxes

photo 6 - The dinosour Cray

photo 7 - Back plane of the Cyber 860 CPU

photo 8 - Front of the Cyber 860 CPU

photo 9 - Condenser unit for Cray C94 or T3D

photo 10 - Progress on the Cyber island

photo 11 - Again, the parked Cyber 960

photo 12 - Framework layed down of Cyber island

photo 13 - Old floor almost gone

photo 14 - Joachim bringing pieces of the floor to the new location

photo 15 - Half way done

photo 16 - And complete

photo 17 - Bucket was the marker where the corner should be

photo 18 - Still some finishing work to do

photo 19 - Kaypro 10 running FSE on NOS (adm3a and 300 baud)

photo 20 - Kaypro 10 on the DI connected to DtCyber

photo 21 - First tape drives on the floor

photo 22 - And the 960 next

photo 23 - Filling up floor space

photo 24 - Next is the construction of the Super island

photo 25 - Done with all the tiles I had

photo 26 - Look from the ramp side

photo 27 - 960 put together

photo 28 - Cray on the move

photo 29 - Overview Cyber island

photo 30 - Overview Super island with the Cray wall

photo 31 - Other side overview Super island

photo 32 - Other side overview Cyber island

photo 33 - Power cables (left of the ramp the 400Hz cables)

photo 34 - DI cabinet with DI and disk emulators

photo 35 Cyber 960 and 930

photo 36 - I/O area - punch is missing

photo 37 - Adding CEE connectors to power cables

photo 38 - More CEE connectors

photo 39 - 3 Phase and single phase 32Amp

photo 40 - Peter in his man hole

photo 41 - Birds eye of the new islands

photo 42 - And the old space is clean

photo 43 - Top down look Cyber island

photo 44 - and in the far distance the Super island